Notifications
Clear all

D-55IR question

5 Posts
3 Users
0 Likes
891 Views
Iluv2hunt
Posts: 12399
Topic starter
(@iluv2hunt)
Illustrious Member
Joined: 17 years ago

2 weeks ago I bought one, and set it up. I put a PNY 2-GB card in it.( I have 6 SD cards that I swap back and forth between all the game cams I use) Pulled the cam when I got there Friday, and it says I have 278 pics. So I pop the SD card out and pop it in my digi cam to look at them (like I have always done for years). Digi Cam says "No Image". Look at game camera and it says 0000 pics. Pop the card back in, and it shows 278 pics. So the pictures are definitely stored on the card, not the game cam. Its just that my digi cam would not read them.

I plugged the cable from the game cam to the TV and could view them on the TV just fine. I did not have my laptop to try to download the pics directly from the game camera.

So when I re-set the camera on Sunday, I took a different card, formatted it on my digi cam, and stuck it in the game cam...Will that fix my problem?? I realize I should be asking this question on the Moultrie site or chasingame, but I figured I'd throw it out here first

4 Replies
DONY1
Posts: 2555
(@dony1)
Famed Member
Joined: 17 years ago

I was having a problem with mine and I think I got the advice from here a while back to format the card and it was good to go.

Reply
Cr0ck1 (Beagler)
Posts: 14758
(@beagler)
Illustrious Member
Joined: 18 years ago

every time you view pics.. delete the dcim folder. make the card totally empty.

Reply
Iluv2hunt
Posts: 12399
Topic starter
(@iluv2hunt)
Illustrious Member
Joined: 17 years ago

Never heard of a dcim folder

Reply
DONY1
Posts: 2555
(@dony1)
Famed Member
Joined: 17 years ago

I've never had to empty the pics before on any of my cams. That's why I use 2 gig cards.

Reply
Share: