An oversized drill (bit) held and turned with fingers will remove that burr, No speacial tool needed. Thats how I remove it.
done from the inside of the brass I assume? anyone have any load info for 25-06 with a 100 and 120 gr bullet and winchester 760 powder? also it looks like the sportsmans attic on 19 in spring hill finally went belly up, thats where I got my powder/primers. only other alternatives I know is Dans gun room in Inverness or harbor reloading in clearwater. anyone know of any closer places near spring hill I hate to pay hazmat and shipping fees.
done from the inside of the brass I assume? anyone have any load info for 25-06 with a 100 and 120 gr bullet and winchester 760 powder?.
Yes, From the inside! You have to do it by feel, but once you acquire a feel for it, It does not take long. As you say, You only have to do it once.
As far as loading data, This is the only chart I have online, Will have to dig out the books.
http://data.hodgdon.com/cartridge_load.asp
made the switch to an AMERICAN assembled REAL leupold vx3l 3.5-10x by 50mm, a definate step up but alot more $, put the chink scope on the 22 mag and the 22 mag scope on the muzloader,traded the mzl scope for vx3- musical scopes. have a lot of sighting in to do, did 2 today.
