I've got that same Grand Slam. I bought it many years ago and have the original wrap on the chain. I looked on Ebay but there are 2 different sizes you can get. Anyone know which one is the right size?
This is the guy I bought from
http://cgi.ebay.com/API-CHAIN-SILENCER-PRE-PUNCHED-HEAT-SHRINK-TUBING-/230497878150?pt=LH_DefaultDomain_0#ht_1121wt_1135
I know The larger chain for the newer models does not fit the original bowhunter model. I ordered a set, and they would not fit. I kept the chains since I also have a newer bowhunter model also. Good post I still need to order some for my older climber.
I've got that same Grand Slam. I bought it many years ago and have the original wrap on the chain. I looked on Ebay but there are 2 different sizes you can get. Anyone know which one is the right size?
This is the guy I bought from
http://cgi.ebay.com/API-CHAIN-SILENCER-PRE-PUNCHED-HEAT-SHRINK-TUBING-/230497878150?pt=LH_DefaultDomain_0#ht_1121wt_1135
Allen, is it fairly easy to use this reshrink product. Any tips on using it.
I've got that same Grand Slam. I bought it many years ago and have the original wrap on the chain. I looked on Ebay but there are 2 different sizes you can get. Anyone know which one is the right size?
This is the guy I bought from
http://cgi.ebay.com/API-CHAIN-SILENCER-PRE-PUNCHED-HEAT-SHRINK-TUBING-/230497878150?pt=LH_DefaultDomain_0#ht_1121wt_1135Allen, is it fairly easy to use this reshrink product. Any tips on using it.
If you don't have a heat gun you can use indirect heat from a propane torch just don't get it too close or you will blister the shrink tube.
I have a heat gun, so it is real easy to do. I previously bought some cheap heat shrink at Harbor Freight and it would not shrink down
