Notifications
Clear all

Cocking string OR crank? (Crossbow)

20 Posts
11 Users
0 Likes
7,816 Views
DONY1
Posts: 2555
(@dony1)
Famed Member
Joined: 18 years ago

I use the crank to uncock mine too. Just put it on reverse and uncrank it back down. Mine is extremely accurate. At 40 yds it's dead nuts every time. It is definitely an advantage over my shooting ability with a compound.

Reply
down4dacount
Posts: 513
(@down4dacount)
Honorable Member
Joined: 15 years ago

It is definitely an advantage over my shooting ability with a compound.

that's the truth , lol

Reply
lamehawk
Posts: 4946
(@lamehawk)
Famed Member
Joined: 18 years ago

hands or rope mark string as said

Reply
bellyacher
Posts: 750
(@bellyacher)
Prominent Member
Joined: 14 years ago

Crank less movement easy.

Agree

So it seems like the crank will be more accurate?

Always has been for mine...

Plus, I always use my crank to de-cock , works fine....I had an old bolt that I fired into the ground one time, but it buried itself so deep....it was a goner......just sayin

IMHO

the cocking rope is just as good. just use a good one that has the guides so it will keep string centered. I use the rope on mine. My stepdad has the crank on his 10 point and I hate that thing. makes way to much noise and is very slow. just don't miss and you wont have to worry about having to re cock while in the stand, at least that's the plan :pinch

Reply
Iluv2hunt
Posts: 12399
(@iluv2hunt)
Illustrious Member
Joined: 18 years ago

the cocking rope is just as good. just use a good one that has the guides so it will keep string centered. I use the rope on mine. My stepdad has the crank on his 10 point and I hate that thing. makes way to much noise and is very slow. just don't miss and you wont have to worry about having to re cock while in the stand, at least that's the plan :pinch

Agree

Reply
Page 4 / 4
Share: